Loading...

MojoSort™ Mouse Neutrophil Isolation Kit

Pricing & Availability
Regulatory Status
RUO
Ave. Rating
Submit a Review
Product Citations
publications
MojoSort_Mouse_Neutrophil_Isolation_Kit_1_072516
A single cell suspension from C57BL/6 mouse bone marrow was prepared to isolate neutrophils using the MojoSort™ Mouse Neutrophil Isolation Kit. Cells were gated on Ly-6G (PE) and CD11b (APC). Dead cells were gated out with 7AAD viability dye.
  • MojoSort_Mouse_Neutrophil_Isolation_Kit_1_072516
    A single cell suspension from C57BL/6 mouse bone marrow was prepared to isolate neutrophils using the MojoSort™ Mouse Neutrophil Isolation Kit. Cells were gated on Ly-6G (PE) and CD11b (APC). Dead cells were gated out with 7AAD viability dye.
  • MojoSort_Mouse_Neutrophil_Isolation_Kit_2_072516
Cat # Size Price Quantity Check Availability Save
480057 10 tests 176€
Check Availability


Need larger quantities of this item?
Request Bulk Quote
480058 100 tests 524€
Check Availability


Need larger quantities of this item?
Request Bulk Quote
Description

Non-Neutrophil cells are depleted by incubating the sample with the biotin antibody cocktail followed by incubation with magnetic Streptavidin Nanobeads. The magnetically labeled fraction is retained by the use of a magnetic separator. The untouched Neutrophils are collected by decanting the liquid in a clean tube. These are the cells of interest; do not discard the liquid. Some of the downstream applications include functional assays, gene expression, phenotypic characterization, etc.

MojoSort™ reagents are also compatible with column-based cell separation systems available from other vendors. Optimized protocols for cell separation using columns from in-house testing are provided for each kit under the “Related Protocols” section, as well as representative data on the product webpage (where available). Data generated using column separators are indicated on the figure legend.

Due to the property of the beads, MojoSort™ reagents typically require dilution for optimal use on column separators. Where available, recommended dilution factors for each kit component based on in-house testing are provided under the “Application Notes” section of the webpage.

Product Details
Technical Data Sheet (pdf)

Kit Contents

Kit Contents

For Cat# 480057:

  • 100 µl Biotin-Antibody Cocktail
  • 100 µl Streptavidin Nanobeads

For Cat# 480058:

  • 1 ml Biotin-Antibody Cocktail
  • 1 ml Streptavidin Nanobeads

Product Details

Verified Reactivity
Mouse
Formulation
Cocktail: Phosphate buffer solution containing 0.09% sodium azide, pH 7.2.
Streptavidin Nanobeads: Aqueous solution containing BSA and 0.05% sodium azide.
Preparation
The antibodies were purified by affinity chromatography, and conjugated with biotin under optimal conditions.
Streptavidin Nanobeads: Streptavidin-coated magnetic beads.
Storage & Handling
Antibody cocktail and Streptavidin Nanobeads should be stored undiluted between 2°C and 8°C.
Application

Cell Separation (MojoSort™) - Quality tested
Recommended Usage

10 µl of antibody cocktail for 1 X 107 cells in 100 µl of buffer.
10 µl Streptavidin Nanobeads for 1 X 107 cells in 100 µl of buffer.

Application Notes

This kit is designed for the isolation of Neutrophils from C57BL/6 bone marrow cells. For optimal results, we recommend incubating the sample in PBS without Ca/Mg on ice for 30 minutes at the final step of the sample preparation procedure. See the protocols for further instructions. 

Each lot has been individually optimized. Do not mix and match components from different lots or different kits.

Antibody or cocktail dilution to use in column: 2X
Nanobead dilution to use in columns: 5X

Product Citations
  1. Xu P, et al. 2020. Cancer Immunol Res. 8:1193. PubMed

Antigen Details

Biology Area
Immunology, Innate Immunity
Gene ID
NA
UniProt
View information about Neutrophil on UniProt.org

Related FAQs

Is there a way to detach your magnetic particles from the cell surface?

No, not currently.  We have found that cells are functional without the need to detach the magnetic Nanobeads.

What is the size of your magnetic particles?

The average diameter is approximately 130 nm.

Are MojoSort™ Nanobeads compatible with other commercially available magnetic separation systems?

MojoSort™ magnetic particles can be used with other commercially available magnetic separators, both free standing magnets and column-based systems.  Because MojoSort™ protocols are optimized for the MojoSort™ separator, the protocols may need to be adjusted for other systems.  Please contact BioLegend Technical Service for more information and guidance. We do not recommend using MojoSort™ particles for BD’s IMag™ or Life Technologies’ DynaMag™.

What antibodies are present in the depletion cocktails provided for isolation kits?

Please contact our technical service team for further assistance.

Go To Top Version: 3    Revision Date: 01/26/2022

For Research Use Only. Not for diagnostic or therapeutic use.

 

This product is supplied subject to the terms and conditions, including the limited license, located at www.biolegend.com/terms) ("Terms") and may be used only as provided in the Terms. Without limiting the foregoing, BioLegend products may not be used for any Commercial Purpose as defined in the Terms, resold in any form, used in manufacturing, or reverse engineered, sequenced, or otherwise studied or used to learn its design or composition without express written approval of BioLegend. Regardless of the information given in this document, user is solely responsible for determining any license requirements necessary for user’s intended use and assumes all risk and liability arising from use of the product. BioLegend is not responsible for patent infringement or any other risks or liabilities whatsoever resulting from the use of its products.

 

BioLegend, the BioLegend logo, and all other trademarks are property of BioLegend, Inc. or their respective owners, and all rights are reserved.

 

8999 BioLegend Way, San Diego, CA 92121 www.biolegend.com
Toll-Free Phone: 1-877-Bio-Legend (246-5343) Phone: (858) 768-5800 Fax: (877) 455-9587

ProductsHere
Login / Register
Remember me
Forgot your password? Reset password?
Create an Account