Loading...

DRAQ7™

Pricing & Availability
Regulatory Status
RUO
Other Names
Live/Dead Staining, Dead cell exclusion dye, Cell viability dye
Ave. Rating
Submit a Review
Product Citations
publications
DRAQ7_FC_041614.jpg
C57BL/6 mouse splenocytes were stored at 4°C for 1 day and then stained with Annexin V FITC, washed, and then stained with DRAQ7™ (1:1000). Cells were acquired on a 633 nm laser equipped-flow cytometer.
  • DRAQ7_FC_041614.jpg
    C57BL/6 mouse splenocytes were stored at 4°C for 1 day and then stained with Annexin V FITC, washed, and then stained with DRAQ7™ (1:1000). Cells were acquired on a 633 nm laser equipped-flow cytometer.
See DRAQ7™ spectral data
Cat # Size Price Quantity Check Availability Save
424001 1 mL 372€
Check Availability


Need larger quantities of this item?
Request Bulk Quote
Description

DRAQ7™ is a far-red emitting, anthraquinone compound that stains nuclei in dead and permeablized cells. It is non-permeant to live cells and thus can be used for differentiating live and dead cells. It is optimally excited at 633 nm, and can be detected using 695LP, 715LP, and 780LP filters. DRAQ7™ can also be used in cell imaging as it does not get excited by UV or Violet lasers and is sub-optimally excited by the 488 nm laser. It can be combined with FITC, PE, and other UV or violet excitable dyes for multi-color analysis. DRAQ7™ is non-toxic and thus can be used for siRNA studies and other dynamic viablity assays.

Product Details
Technical Data Sheet (pdf)

Product Details

Preparation
DRAQ7™ is supplied at 1 ml per vial (300 µM).
Storage & Handling
DRAQ7™ should be stored between 2°C and 8°C upon receipt.
Application

FC - Quality tested
Recommended Usage

DRAQ7™ is a trademark of Biostatus Limited.

Application Notes

DRAQ7™ is a membrane impermeable dye that only stains the nuclei of dead or permeabilized cells. It is a far-red emitting dye with optimal excitation/ emission peaks of 633nm/ 695nm, respectively. Suboptimally, DRAQ7™ can be excited at 561nm and 594nm as well, with the same emission peak occurring at 695nm. Ideally, this probe should be detected in the Alexa Fluor® 700 and APC/Cy7 emission filters off of the 633nm laser.

 

Protocol for Dead Cell/Apoptosis Analysis using DRAQ7™:

1. Perform surface staining or Annexin V staining following protocol of choice.

2. Wash cells twice with phosphate buffered saline (PBS). Sodium azide interferes with DRAQ7™ staining; therefore it is recommended to stain in PBS (without calcium or magnesium) or in culture medium without sodium azide.

3. Dilute DRAQ7™ to your required concentration. We recommend titrating the reagent to determine optimal concentration for cells of interest. Good results have been observed using a 1:200 to 1:1000 dilution.

4. Incubate at room temperature, preventing exposure to light, for 10-15 minutes. No washing is necessary.

5. Analyze cells on a cytometer equipped with the appropriate laser.

Product Citations
  1. Pavesi A, et al. 2016. Sci Rep. 6: 26584. PubMed
  2. Garvey C, et al. 2016. Sci Rep. 6:29752. PubMed

Antigen Details

Biology Area
Cell Biology, Cell Cycle/DNA Replication, Cell Motility/Cytoskeleton/Structure, Cell Proliferation and Viability, Neuroscience
Antigen References

1. Akagi J, et al. 2013. Cytometry A. 83: 227.
2. Smith PJ, et al. 2013. Cytometry A. 659-71.
3. Wlodokowic D, et al. 2013. Curr Protoc Cytom. Chapter 9. Unit 9.4.1

Gene ID
NA

Related FAQs

There are no FAQs for this product.
Go To Top Version: 2    Revision Date: 01/16/2017

For Research Use Only. Not for diagnostic or therapeutic use.

 

This product is supplied subject to the terms and conditions, including the limited license, located at www.biolegend.com/terms) ("Terms") and may be used only as provided in the Terms. Without limiting the foregoing, BioLegend products may not be used for any Commercial Purpose as defined in the Terms, resold in any form, used in manufacturing, or reverse engineered, sequenced, or otherwise studied or used to learn its design or composition without express written approval of BioLegend. Regardless of the information given in this document, user is solely responsible for determining any license requirements necessary for user’s intended use and assumes all risk and liability arising from use of the product. BioLegend is not responsible for patent infringement or any other risks or liabilities whatsoever resulting from the use of its products.

 

BioLegend, the BioLegend logo, and all other trademarks are property of BioLegend, Inc. or their respective owners, and all rights are reserved.

 

8999 BioLegend Way, San Diego, CA 92121 www.biolegend.com
Toll-Free Phone: 1-877-Bio-Legend (246-5343) Phone: (858) 768-5800 Fax: (877) 455-9587

ProductsHere
Login / Register
Remember me
Forgot your password? Reset password?
Create an Account