TotalSeq™-A0445 anti-TMEM119 (Extracellular) Antibody

Pricing & Availability
A16075D (See other available formats)
Other Names
Transmembrane protein 119
Mouse IgG2b, κ
Ave. Rating
Submit a Review
Product Citations
Cat # Size Price Quantity Avail. Save
853303 10 µg £218
Check Availability

Need larger quantities of this item?
Request Bulk Quote

Microglia are the resident parenchymal myeloid cells of the CNS, and play an important role in development, homeostasis, disease, and injury. TMEM119 is a transmembrane protein and was identified as a microglia-specific marker in both mouse and human CNS. Moreover, TMEM119 immunoreactivity has been exclusively detected on a subset of Iba1(+) CD68(+) microglia with ramified and amoeboid morphologies in the brains of neurodegenerative diseases. TMEM119 also plays an important role in bone formation and normal bone mineralization. It promotes the differentiation of myoblasts into osteoblasts. and it may induce the commitment and differentiation of myoblasts into osteoblasts. TMEM119 is also essential for normal spermatogenesis and late testicular differentiation.

Product Details
Technical Data Sheet (pdf)

Product Details

Antibody Type
Host Species
Recombinant human TMEM119 protein (extracellular domain)
Phosphate-buffered solution, pH 7.2, containing 0.09% sodium azide and 1 mM EDTA.
The antibody was purified by chromatography and conjugated with TotalSeq™-A oligomer under optimal conditions. The solution is free of unconjugated DNA and unconjugated antibody.
0.5 mg/ml
Storage & Handling
The antibody solution should be stored undiluted between 2°C and 8°C. Do not freeze.

PG - Quality tested

Recommended Usage

Each lot of this antibody is quality control tested by immunofluorescent staining with flow cytometric analysis and the oligomer sequence is confirmed by sequencing. For Proteogenomics TotalSeq™-A analysis, the suggested use of this reagent is ≤ 1.0 µg per million cells in 100 µl volume. It is recommended that the reagent be titrated for optimal performance for each application.

To maximize performance, centrifuge the antibody dilution (1.0 µg of antibody in 100 µl of staining buffer for every 1 million cells) before adding to the cells at 14,000xg at 2 - 8°C for 10 minutes. Carefully pipette out the liquid avoiding the bottom of the tube and add to the cell suspension.

Buyer is solely responsible for determining whether Buyer has all intellectual property rights that are necessary for Buyer's intended uses of the BioLegend TotalSeq™ products. For example, for any technology platform Buyer uses with TotalSeq™, it is Buyer's sole responsibility to determine whether it has all necessary third party intellectual property rights to use that platform and TotalSeq™ with that platform.
Application Notes

For microscopy, the antibody was found to work best when using fresh frozen human tissues. Communication by Dr. Frederick Christian Bennett at Stanford University, under review in Neuron.

*The human TMEM119 full length plasmid was a courtesy gift from Dr. Ben Barres at Stanford University.

Additional Product Notes

TotalSeq™ reagents are designed to profile protein expression at a single cell level following an optimized protocol similar to the CITE-seq workflow. A compatible single cell device (e.g. 10x Genomics Chromium System and Reagents) and sequencer (e.g. Illumina analyzers) are required. Please contact technical support for more information, or visit

The TotalSeq™-A barcode sequence associated with clone A16075D is TCGAACATTTCCAGG.

The flanking sequences are CCTTGGCACCCGAGAATTCCA, and the capture sequence, BAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA*A*A, B represents either C, G, or T, and * indicates a phosphorothioated bond, to prevent nuclease degradation.

The full oligomer sequence for this product, with the specific barcode in brackets is CCTTGGCACCCGAGAATTCCA [TCGAACATTTCCAGG]BAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA*A*A.

Application References

(PubMed link indicates BioLegend citation)
  1. Bennett FC, et al. 2018. Neuron. 98:1-14 PubMed

Antigen Details

TMEM119 is an 283 amino acid protein with a molecular mass of 30 kD.

Tissue distribution: TMEM119 is expressed in the brain, bone, and lymphoid tissues.
Cellular distribution: Membrane and endoplasmic reticulum.

TMEM119 is an important microglia marker and is implicated in neurodegenerative diseases.
TMEM119 interacts with SMAD1, SMAD5 and RUNX2.
Biology Area
Cell Biology, Neuroscience, Neuroscience Cell Markers
Antigen References
  1. Bennett ML, et al. 2016. Proc Natl Acad Sci U S A. 113
  2. Satoh J, et al. 2016. Neuropathology. 36:39-49
  3. Kawao N and Kaji H. 2015. J Cell Biochem. 116:687
  4. Zrzavy T, et al. 2017. Brain. 140:1900-1913
Gene ID
338773 View all products for this Gene ID
View information about TMEM119 on

Related FAQs

What is TotalSeq™ and how do they work with established workflows (CITE-seq, and REAP-seq)?

TotalSeq™ is BioLegend’s brand of antibody-oligonucleotide conjugates, to enable simultaneous analysis of proteins and mRNA in single cells. CITE-seq and REAP-seq are two similar workflows to do simultaneous protein and mRNA analysis, and the TotalSeq™ conjugates integrate seamlessly into these workflows.

What’s the benefit of Cell hashing?

Hashing allows customers to run multiple samples in a single lane of a 10x Genomics Chromium instrument, or equivalent, which increases the number of cells or samples that can be analysed simultaneously, significantly decreasing the cost of the experiment.

Does co-staining for FACS and TotalSeq™ interfere with the workflow?

Hashtag reagents are intended to be used for sample barcoding, which allows users to combine multiple samples into a single lane, then de-multiplex during analysis. Instead of select antigen-specific antibodies, the hashtags are designed so that they are specific for human or mouse cells, and to cover as many cells as possible. For human samples, the hashtags are made of two antibodies that recognize ubiquitous surface markers, CD298 and β2 microglobulin, each conjugated to the same oligonucleotide containing the barcode sequence. For mouse samples, the surface markers are CD45 and H-2 MHC class I. The conjugates are already pre-mixed and ready to use.

Is it possible to do FACS sorting first then do CITE-Seq, while performing both antibody-oligo and antibody-fluorophore labelling at the same time? Will the oligo conjugate withstand sorting?

The oligo should withstand sorting. However, based on theoretical considerations we recommend to use non-competing clones, to minimize impact in either FACS or sequencing signal/reading. Even if exposed for a very short time, we have not evaluated the effect of ultraviolet or violet lasers on the oligo conjugates. An alternative to flow sorting could be magnetic bead enrichment, such as our MojoSort™ platform.

How many TotalSeq™ antibodies is it possible to multiplex?

A published article multiplexed 82 antibodies conjugated to oligonucleotides. The authors did not use current TotalSeq™ antibodies, but the method is very similar, which they termed REAP-seq. There is no reason to believe that larger panels are not possible.

How many cells do you need per experiment?

This depends on the biological question that needs to be answered. From the technical perspective, when using 10X Genomics Chromium, it is recommended to load 5,000 – 10,000 cells per lane. The use of Hashtags can increase that number. For ease of staining, we typically recommend 1 million cells, but this number also depends on availability of cells and the operator’s ability to handle low cell numbers.

What is the baseline copy number for detection of protein expression (via TotalSeq™ labelling)?

This has to do mostly with antibody affinity, titration, and level of antigen expression. BioLegend and some collaborators are working on titration data. There is also some data already published. In theory, as long as the antibody can bind one molecule, PCR amplification and sequencing should pick it up, but there is always background noise. A common way to control for this is to add negative cells to your experiment. For example, if working with human PBMCs, use mouse cells and vice versa.

Is autofluorescence an issue as in flow cytometry?

No, sequencing as the final readout is not affected by cell autofluorescence.

Can CITE-seq be extended to micro-RNAs?

This is a technically challenging application as micro-RNAs are very small, and in many cases will be as small as or even smaller than the required primers to execute the protocol. It is not possible at the moment.

Is it possible to run CyTOF® and TotalSeq™ (CITE-seq) alongside each other?

Not in the same experiment; it is not possible because CyTOF® requires its own instrument and protocol, and it destroys the sample in the process. To do so, it is necessary to split the sample and run both CyTOF® and CITE-seq assays. Note that CITE-seq generates equivalent data for surface proteins as CyTOF® with higher panel multiplexing capabilities and at a single-cell level.

How is the oligo tag bound to the antibody so that it does not interfere with antibody binding to target protein?

The oligo is attached to the antibody in the same method as some of our fluorophore-conjugated antibodies that are quality tested for flow cytometry. Once the antibodies have been conjugated to the oligonucleotide, we verify by flow cytometry that the antibody can still bind to its target. This is part of our quality control process for TotalSeq™ conjugates.

Is it necessary to sort samples prior to CITE-seq? What should I consider when deciding to pre-sort, or not?

If the populations of interest can be clustered/identified without sorting, the likelihood that you need to pre-sort is minimal. However, if the cell number in the cluster is very small, it may not be sufficient to draw conclusions when compared to control, or other cell populations. In which case, enrichment of this population prior to CITE-seq analysis may help with obtaining more meaningful sequencing data that is selective for your rare cell population(s) of interest. We also recommend to sort out dead cells if the viability in a sample is lower than 95%.

Why is it essential to remove dead cells prior to subjecting samples for CITE-seq?

Running dead cells during CITE-seq essentially leads to “wasting” single cell runs on dead cells, which may ultimately lead to sub-optimal data, or not processing enough cells to pick up the positive events, especially if the frequency of your target cell is very low. Dead cells can also be removed using magnetic particles. If performing CITE-seq before eliminating dead cells is required, it is possible to use bioinformatics methods to try to clean up low quality events (which may include dead cells). This could be a more complex approach, but in such cases, we recommend the following reading:

How can I titrate TotalSeq™ antibodies?

We are still in the process of identifying optimal concentrations for the use of TotalSeq™ reagents. However, here is what we can recommend for titrations:

  1. Performing titrations using the actual CITE-seq method is costly, but using Hashtags can make the process more affordable. See Fig. 3 and associated methods of this publication for more information.
  2. Perform flow cytometry experiments to find the optimal antibody amount, using the same clone conjugated to PE. The flow cytometry antibody amount translates well to the CITE-seq amount.
  3. Label the cells with different concentrations of TotalSeq™ antibody, and then use a poly-dT oligo conjugated to a fluorophore, such as Alexa Fluor® 647, as a secondary reagent to detect the TotalSeq™ antibody. This is a more direct method as compared to the ones listed above, but it requires the use of the actual TotalSeq™ antibody.


Why should I generate ADT/Hashtags libraries separate from mRNA?

To provide flexibility when sequencing. Libraries can be mixed at different ratios before sequencing depending on the number of reads needed.

I need to order primer; where do I order them and what purity is needed?

There are several companies offering primer synthesis. We can recommend IDT technologies. For additive primers, desalt purification is sufficient. For index primers, either HPLC or PAGE is needed.

What tools are available for data analysis?

Cell Ranger 3.0 can be used for barcode count, although some reagents or applications may not be supported by 10x Genomics. Useful resources include CITE-Seq-Count, and the Satija Lab. Please contact our technical service group ( for further information.

What are "Hashtags"?

Hashtag reagents are intended to be used for sample barcoding, which allows users to combine multiple samples into a single lane, then de-multiplex during analysis. Instead of select antigen-specific antibodies, the hashtags are designed so that they are specific for human or mouse cells, and to cover as many cells as possible. For human samples, the hashtags are made of two antibodies that recognize ubiquitous surface markers, CD298 and β2 microglobulin, each conjugated to the same oligonucleotide containing the barcode sequence. For mouse samples, the surface markers are CD45 and H-2 MHC class I. The conjugates are already pre-mixed and ready to use.

Go To Top Version: 1    Revision Date: 01/16/2019

For research use only. Not for diagnostic use. Not for resale. BioLegend will not be held responsible for patent infringement or other violations that may occur with the use of our products.


*These products may be covered by one or more Limited Use Label Licenses (see the BioLegend Catalog or our website, BioLegend products may not be transferred to third parties, resold, modified for resale, or used to manufacture commercial products, reverse engineer functionally similar materials, or to provide a service to third parties without written approval of BioLegend. By use of these products you accept the terms and conditions of all applicable Limited Use Label Licenses. Unless otherwise indicated, these products are for research use only and are not intended for human or animal diagnostic, therapeutic or commercial use.


BioLegend Inc., 9727 Pacific Heights Blvd, San Diego, CA 92121
Toll-Free Phone: 1-877-Bio-Legend (246-5343) Phone: (858) 768-5800 Fax: (877) 455-9587

This data display is provided for general comparisons between formats.
Your actual data may vary due to variations in samples, target cells, instruments and their settings, staining conditions, and other factors.
If you need assistance with selecting the best format contact our expert technical support team.

Login / Register
Forgot your password? Reset password?
Create an Account