- Regulatory Status
- Other Names
- Multiplex assay, flow cytometry, Flex set, CBA, cytokines, IL-13, GM-CSF, IL-1b, IL-5, sCD25 (IL-2Ra), IL-4, VEGF, IL-17A, IL-18, CCL4 (MIP-1b), IL-15, IL-12p70
- Ave. Rating
- Submit a Review
- Product Citations
Coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has spread rapidly across the world to become a global pandemic. Although most patients have a favorable prognosis and recover; those with severe illness may develop dyspnea and hypoxemia which can quickly progress to or death. Accumulating clinical evidence has shown an abnormal and uncontrolled production of cytokines, termed a cytokine storm, in critically ill COVID-19 patients. This cytokine storm is the major contributing factor in the clinical severity of the disease. As shown by multiple scientific reports, COVID-19 cytokine storm and subsequent ARDS is driven by the fulminant effects of many immune effector molecules including chemokines, interferons, interleukins, colony-stimulating factors and TNF-α.
The COVID-19 Cytokine Storm Panel 2 (12-plex) is a multiplex bead-based assay panel, using fluorescence–encoded beads suitable for use on various flow cytometers. This panel allows simultaneous quantification of 12 human cytokines, including IL-13, GM-CSF, IL-1β, IL-5, sCD25 (IL-2Ra), IL-4, VEGF, IL-17A, IL-18, MIP-1β (CCL4), IL-15, and IL-12p70. This assay panel provides higher detection sensitivities and broader dynamic ranges than traditional ELISA methods. The panel has been validated by detecting expected changes in biological samples.
The panel has been validated for use on cell culture supernatant, serum, and plasma samples.
IL-13, GM-CSF, IL-1β, IL-5, sCD25 (IL-2Ra), IL4, VEGF, IL-17A, IL-18, CCL4, IL-15, IL-12p70
Please visit www.biolegend.com/legendplex for more information on how to mix and match within the panel.
- Kit Contents
- Setup Beads 1: FITC Beads (1 mL)
- Setup Beads 2: PE Beads (1 mL)
- Setup Beads 3: Raw Beads (2 mL)
- Capture beads (Varies)
- COVID-19 Cytokine Storm Panel 1 & 2 Detection Antibodies (3.5 mL)
- COVID-19 Cytokine Storm Panel 1 & 2 Standard Cocktail, Lyophilized (1 vial)
- LEGENDplex™ SA-PE (3.5 mL)
- LEGENDplex™ Matrix B2, Lyophilized (1 vial)
- LEGENDplex™ Assay Buffer (25 mL)
- LEGENDplex™ Wash Buffer, 20X (25 mL)
- Plate Sealers (4 sheets)
- Filter Plate
Learn more about LEGENDplex™ at biolegend.com/legendplex
Download the LEGENDplex™ software here.
- Materials Not Included
- Flow Cytometer
- Pipettes and Tips
- Reagent Reservoirs for Multichannel Pipettes
- Polypropylene Microfuge Tubes
- Vortex Mixer
- Aluminum Foil
- Absorbent Pads or Paper Towels
- Plate Shaker
- Tabletop Centrifuges
- A Vacuum Filtration Unit and a Vacuum Source (if using filter plates)
- Centrifuge with a swinging bucket adaptor for microtiter plates (if using V-bottom plates)
- 1.1 mL polypropylene micro FACS tubes, in 96-tube rack
- Gene ID
- 3596 View all products for this Gene ID 1437 View all products for this Gene ID 3553 View all products for this Gene ID 3567 View all products for this Gene ID 3559 View all products for this Gene ID 3565 View all products for this Gene ID 7422 View all products for this Gene ID 3605 View all products for this Gene ID 3606 View all products for this Gene ID 8741 View all products for this Gene ID 6351 View all products for this Gene ID 3600 View all products for this Gene ID 3592 View all products for this Gene ID 3593 View all products for this Gene ID
- View information about IL-13, GM-CSF, IL-1β, IL-5, CD25, IL-4, VEGF, IL-17A, IL-18, CCL4, IL-15, IL-12p70 on UniProt.org
- If I don't have a vacuum, how do I remove the liquid from my plate?
If you do not have a vacuum, the assay should be run in a V-bottom plate. After centrifugation using a swinging-bucket rotor with a plate adaptor, you can remove the liquid by flicking the plate quickly, dumping the contents into a sink, and patting it dry carefully on a stack of clean paper towels without losing the beads. Alternatively, you can remove the liquid by using a pipette.
- Should I perform the assay with the filter plates or with V-bottom plates?
Filter plates or V-bottom plates have been included in some kits for your convenience. A vacuum filtration unit is required to work with the filter plates. However, if you don’t have access to a vacuum manifold or if you prefer, then you can use the V-bottom plates and follow the recommended assay protocols for the type of plates you choose. All plates should be made from low binding polypropylene. Polystyrene ELISA or cell culture plates should not be used.
- After I finish the staining process, how long can I wait before reading my LEGENDplex™ samples?
The samples can be kept overnight at 4°C while being protected from exposure to light and be read the next day. There may be a decrease in signal, but overall, the assay results should not be affected. Storing the samples for extended periods of time is not recommended, as it could lead to further reductions in signal.
- What is the shelf life of LEGENDplex™ kits?
LEGENDplex™ kits are guaranteed for 6 months from the date of receipt, but may have a shelf life of up to 2 years from the date of manufacture.
- Is special software required for data analysis?
Typically flow cytometers generate output files in FCS format (e.g. FCS 2.0, 3.0, or 3.1) and in some cases in list mode file format (LMD). Other software may be available to analyze FCS files. Data generated using LEGENDplex™ kits can be analyzed using the freely available LEGENDplex™ data analysis software. Please check our website for the most updated versions of the software.